1.1 kWHandheld · single phase
HANDINDUCTOR
The one-hand induction gun. Bolts, small brackets, glass and trim adhesive — in the case, on the truck, ready.
Power 1.1 kW
Form handheld
Input see datasheet
Inductors flexible + rigid set
GYS in the USA / Induction Heating
Induction heating
Heat without flame.
Free seized bolts, straighten frames, shrink-fit bearings, braze, lift glass and trim — heat exactly the metal you point at, in seconds, with no torch and no gas bottle on the floor.
1.1 to 22 kW handheld to heavy industry
Up to 92% cheaper to run than oxy-acetylene, per GYS
No flame, no gas — nothing to store, nothing to insure
Double-digit growth — GYS's fastest-growing catalogue
Flame vs induction
Same heat. None of the rest.
Safe
No open flame
Nothing ignites the fuel line, the wiring loom or the rubber bushing next to the part. Flameless heating cuts the fire risk and the hot-work paperwork.
Accurate
Heats only the part
The field couples to the steel you're pointing at. Paint, plastic and sensors an inch away stay cool.
Fast
Red in seconds
Heats to the core of the metal quicker than a torch can, so a seized nut is moving before the coffee's cold.
Cheap to run
Electricity, not cylinders
GYS puts running cost up to 92% below oxy-acetylene, with no cylinder rental, refills or the insurance surcharge that comes with gas.
The range
Request any datasheetPick the power for the job.
1.1 kW
1.2 / 1.75 kWCompact · single phase
POWERDUCTION 1.2 & 1.75 kW
Bench-top box with a hand-held inductor lance. The everyday shop machine for fasteners, bushings and heat-shrink.
Power 1.2 / 1.75 kW
Form portable box + lance
Input see datasheet
Inductors interchangeable
3.7 kWWorkshop · mobile
POWERDUCTION 3.7 kW
Trolley-mounted, liquid-cooled, with the full inductor library. The collision and truck-shop workhorse.
Power 3.7 kW
Cooling liquid
Input see datasheet
Inductors full library
5.2 kWHeavy workshop · mobile
POWERDUCTION 5.2 kW
More power for bigger sections — suspension, axles, chassis brackets, agricultural and construction iron.
Power 5.2 kW
Cooling liquid
Input see datasheet
Inductors full library
11 / 16 / 22 kWIndustrial · three phase
POWERDUCTION 11 / 16 / 22 kW
Rail, marine, mining, heavy plant. Shrink-fits, large bearings, bends and releases that used to take a rosebud and an hour.
Power 11 / 16 / 22 kW
Input three phase — see datasheet
Cooling liquid
Inductors heavy series + custom
2.4 / 5.2 kWBodyshop
GYSDUCTION AUTO
The collision-shop induction system: glass and molding removal, adhesive release, dent and hail work, seized fasteners — heat exactly where you want it and nowhere else.
Power 2.4 / 5.2 kW
Use glass, trim, dents
Input see datasheet
Inductors glass, spiral, flat, pad
Power ratings are GYS's published figures. Input voltage, duty cycle and weights are on each datasheet — we link them rather than restate them.
What shops use it for
Six jobs that stop needing a torch.
Releasing
Seized bolts, nuts, bearings
Exhaust studs, suspension bolts, wheel bearings. Heat the nut, not the stud; it lets go without a cut-off wheel.
Straightening
Frames, rails, brackets
Local, controllable heat for pulls and straightening on structural steel — frames, rails, brackets, truck and trailer members — repeatable enough to document.
Heat shrinking
Panels and shrink-fits
Shrink stretched sheet metal on the car; shrink-fit bearings, gears and couplings on the bench.
Brazing
Copper, brass, silver
Even heat around the joint with no flame wash; cleaner joints on lines, fittings and heat exchangers.
Bending & heating
Bars, tubes, plate
Bring a section to forming temperature in place, in seconds, without heating the whole assembly.
Glass & trim
Adhesive release
Windshields, quarter glass, moldings, badges, stickers — softened from the inside, lifted without the blade.
Pick your path
Same heat. Different jobs.
Collision
Body shop
Glass and molding removal, adhesive and decal release, dent and hail work, seized bolts on suspension and exhaust. GYSDUCTION AUTO and the HANDINDUCTOR.
Start: GYSDUCTION AUTO · find your dealer
Industrial
Fabrication & maintenance
Shrink-fitting bearings and gears, releasing seized hardware on plant equipment, pre-heat and brazing, straightening plate and beams. POWERDUCTION 37 to 220 kW with flat, spiral and custom inductors.
Start: POWERDUCTION 50 / 110 · industrial supply partners wanted
Mechanical & fleet
Truck, bus, ag, off-road
Rusted suspension bolts, exhaust studs, kingpins, hub and axle nuts — out in minutes, no flame near fuel lines, airbags or wiring. Fleet shops, dealers, tire and brake centers.
Start: POWERDUCTION 37LG / 50LG · find your dealer
Government & institutional
Municipal, military, rail, marine
Public-works garages, transit and rail depots, port and shipyard maintenance, base motor pools — anywhere a hot-work permit slows the job down. Flameless heat changes the paperwork as much as the work.
Start: talk to a tech · ask about your application
Every path uses the same generators and the same inductor library — the difference is which inductors and how much power. A GYS-trained tech sizes it for the job you actually have.
Sold and serviced here
Stocked in the US, with inductors on the shelf and a tech on the phone.
Your GYS dealer demos it on your own seized part. If there's no dealer near you yet, we'll still take care of you — and if you sell equipment, we're looking for partners.
